Accessories

Want to bikepack without breaking the bank? Banjo Brothers to the rescue. A huge seat-mounted pack for bikepacking and commuting - no rack required. Usable capacity between 800 cu in and 350 cu in. 800 cu in (13L) – 22 x 7 x 6.25. Can be compressed down to 350 cu in when full capacity not needed. Rigid hull inside front of bag for secure support even when bag isn’t full. Removable waterproof liner. Requires a gap between saddle rails and fender of at least 8". - Weight: 2 lbs - Dimensions: 22.0"L 7.0" H x 6.25" W - Capacity: 800 cubic inches / 13L - Removable waterproof liner. - Requires a gap between saddle rails and tire of at least 8". - Imported

When it's time to load up the bike and go, whether it's across town or across Europe, Banjo Brothers' Rack Top Pannier Bag has the features to serve you well. It attaches to pretty much any rear rack and gives you huge cargo capacity. It's trim when you just do quick jaunts and if you need serious room, just drop the panniers down and go big. Thick padding pulls double duty by insulating your snacks and protecting your gear. The ripstop fabric upper and rugged ballistic bottom panel are tough enough for cross-country treks, too. Reflective accents provide 360 degrees of visibility and there's a clip for a taillight as well. What's more, a detachable shoulder strap lets you carry the whole bag easily into the office or up to the summit for a photo-op. - Includes a detachable shoulder strap, a loop for a safety light, and an internal key clip, and coin pocket - Expandable from 900 to 1300 cubic inches with a drop-down pannier on either side - Thick padding insulates snacks and protects gear - Fits most rear-mount bike racks - Ripstop fabric upper with rugged ballistic bottom panel - Offers more visibility with 360 degree reflective accents - Weight: 934g

Banjo Brothers makes the Commuter Backpack for riders who go out everyday, in any weather. Its roll-top outer is made from ballistic nylon with a welded-seam liner that's utterly waterproof. Wide, padded straps evenly distribute weight comfortably on the bike or off, while chest and waist straps add stability. It sits low on the back to reduce blind spots. And, there are two quick-access side pockets, organizing pockets, a shoulder-strap-mounted phone holder, large reflective stripes, and a taillight tab.

Any ride, any weather, Banjo Brothers' Minnehaha Commuter Backpack is your trusty carry-it-all companion. Its classic, heavy-duty 20-ounce cotton canvas construction is treated with dry-wax water repellent. And it features Banjo's proven fully downpour-proof inner liner to keep your gear dry in any condition. Wide, padded straps evenly distribute weight comfortably on the bike or off, while a chest strap adds stability. It sits low on the back to reduce blind spots. And, there are two quick-access side pockets, a shoulder-strap-mounted phone holder, and a blinkie tab.

The 100% waterproof Banjo Brothers Pannier Backpack converts from pannier to backpack in seconds and it's the most affordable "backpack pannier" on the market. Bicycle commuters everywhere can rejoice. No stupid gimmicks. The pannier hooks end up opposite the rider's back, making the backpack more comfortable. Not many people know just how stubborn Banjo Eric is. Maybe it's the German in him but for two-plus years, he steadfastly refused to launch a pannier that converts to a backpack into the Banjo Brothers line until the comfort and functionality were 1000% perfect. You, my friends, will be the benefactor of his dogged determination to make a better mousetrap. HOW DOES THE CONVERTIBLE BACKPACK PANNIER WORK? Remove the pannier from the bike. Unhook the panniers main flap and reverse it over the pannier hooks and use the side-release buckles to secure it in place. Backpack straps will be revealed. Put the backpack straps over your shoulders, adjust and you're ready to go. New for 2021 A universal J-Hook designed to work with most racks replaces the triangle ring with dropout hooks. Since the J-Hook is designed to attach directly to the rack, we no longer supply the dropout hooks. For a short time you might find legacy inventory with the older system, however, Banjo Brothers will no longer supply or hold replacement parts for those systems. PRODUCT FEATURES - Weight: 3.1 lbs - Dimensions: 15.5" H x 11.5" L x 6.75"D - Capacity: 1100 Cubic Inches / 19 liters - What size laptop will this bag fit? 10.5" x 16" (generally 15" laptops) - Sold as: single pannier - Two-layer design with a ballistic outer layer and welded-seam liner that is fully replaceable. - What does the inside of the bag look like? - What will it hold? Generally, this is an ideal bag for bike commuters. It holds extra shoes, lunch, change of clothes, and your computer. - Flap pockets and side pockets - Reflective piping and striping - Places for flashing lights on the pannier and backpack sides - Outer quick-access flap pocket and two side pockets - Included handle and two backpack straps - Imported

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes

A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - -01: carrier plate for rear racks that are not MIK ready. - -02: adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

- Water-repellent polyester, velcro mounting - Main compartment: inner mesh pocket, smartphone touchable pouch, opening for ear buds, raincover - 1L

- Fits lengthwise on the luggage carrier of your bike. - Easily attached with supplied mounting hardware. - Ideal for carrying shopping, daily essentials or school supplies. - Weatherproof with a reinforced frame. - Classic black color.

- Easily attached with the use of the hook-on system. - Reflective details keep you visible in the dark. - Elasticated side pockets for water bottle and umbrella storage. - 18L

- Double bag, of water-repellent polyester - Closing with buckles - Topside with two bands for LED/straps/child’s seat/spring clamp - Double reflective stripes on all sides - Integrated mounting system

- Made from waterproof tarpaulin & polyester - Water protective folding closure - Universal Bridge System compatible - Reflection on all sides - Dimensions: 41cm x 18cm x 36cm - Volume: 48L

- The Basil Navigator Waterproof features a roll-top closure with an additional adjustable hook. - Thanks to the handle and shoulder strap, you can easily take the bag anywhere. - Waterproof (IPX 3). - Includes a reflective elastic front pocket.

- Trunk bag, waterproof (IPX3) - Elastic cord ontop and mesh side pockets - Removable and adjustable shoulder strap - Waterproof lining with roll top - Fastening: 4 straps at bottom - Compatible with iRack, Racktime and Carrymore system - 7L

- Waterproof (IPX3) - Ajustable elatic buckle closure - Elastic mesh side pockets - Universal Bridge system - Mounting with 4 straps - Compatible with iRack, Carrymore and Racktime

- Robust and large front carrier - With stays for mounting on front axle, includes 2 handlebar hooks (for 21-31.8 mm). - Maximum 10kg

- Waterproof (IPX3) - Welded construction - 100% tarpaulin - LED mounting possibility - 50L capacity - Strap mounting system - Aluminum buckle - 50L

- Double bicycle bag, water-repellent polyester - Reflective stripes - Elastic bottle bands inside - Main compartment with pull cord - MIK system carriers/carrier plates, incl. MIK Adapter plate (70171) - 32L

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates

Need to hold down your GoKASE or DriKASE iPhone case? If you have multiple bikes, an ATV, or stroller, the Xtended X Bracket will allow multiple mountings with GoKASE or DriKASE iPhone cases. • Fits handlebar diameters 22mm to 34mm

Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.

The Bungee net is 12?x12? with 4 heavy duty hooks. Made with very durable shock cord material.

BiKASE's Handy Andy holds all iPhones (in and out of cases), Androids, such as Motorola's Bionic and Razor, the Samsung Galaxy and many more phones. It quickly, easily and securely mounts with the neoprene Velcro straps. Simply wrap them around your handlebars, stem, frame top tube, or even your backpack for easy access to your smart phone while riding. No tools are required! This phone pouch makes calling or navigating with a GPS or training app simple. The see-through window allows viewing information while keeping your phone or device protected and lets you easily operate the touch screen and talk, too, with the phone in the case. A removable pad is included for those really thick phones. • Removable straps to use as cycling wallet. • Mounts on stem or top tube • Mounts on backpacks, messenger bags, strollers, grocery cart, etc. • Reflective logo • 2 Way Zipper Pull • Material: 840 denier nylon/TPU cover • 6.00 x 3.38 x 1-inches • 100 grams

The Happy Can from BiKASE is a convenient handlebar/stem mounted drink holder or general purpose stash sack. Using a few hook and loop straps, the Happy Can mounts between your handlebar and stem so you have easy access to your beverage or other items. - easily connects to handlebars and stem using 2 Velcro straps - securely fits cycling water bottle or other bottle sizes - perfect to use as a small storage bag for snacks or phone - mesh side pocket - rain fly with draw string to secure water bottle on bumpy rides

The SuperBand is a tough, lightweight, and simple solution to attach virtually anything to your bike. - Fits all size smartphones with or without a case (iPhone 10/X, 11, X plus, 7, plus, 8 plus, Samsung Galaxy, Samsung Note, Google Pixel 2, Google Pixel 2 XL, OnePlus, etc.) - Easily holds down small items such as a light jacket, sunglasses, energy bars, pump, tubes, C02 cartridges, water bottle, flashlight, Bluetooth speaker, etc. - Easily attaches to the top tube, stem, or seat post using durable rubber O-rings (2 sizes included) - Can be attached to the water bottle bolts or a separate water bottle bracket - Use on a bicycle, golf cart, stroller, ATV/UTV

Using super heavy duty rubber, the TrailKASE is designed to conveniently fit any size phone with or without a case on your bicycle while you ride! Using an 1/8 turn (10 o’clock to 12 o’clock), the TrailKASE securely attaches to the handle bar bracket (included). By simply wrapping the rubber case around all 4 corners of your phone, your phone is secure and provides 100% visibility to your screen.

BiKASE's Handy Andy holds all iPhones (in and out of cases), Androids, such as Motorola's Bionic and Razor, the Samsung Galaxy and many more phones. It quickly, easily and securely mounts with the neoprene Velcro straps. Simply wrap them around your handlebars, stem, frame top tube, or even your backpack for easy access to your smart phone while riding. No tools are required! This phone pouch makes calling or navigating with a GPS or training app simple. The see-through window allows viewing information while keeping your phone or device protected and lets you easily operate the touch screen and talk, too, with the phone in the case. A removable pad is included for those really thick phones. • Removable straps to use as cycling wallet. • Mounts on stem or top tube • Mounts on backpacks, messenger bags, strollers, grocery cart, etc. • Reflective logo • 2 Way Zipper Pull • Material: 840 denier nylon/TPU cover • 6.75 x 3.5 x 1-inches (fits iPhone 6+ and larger androids) • 100 grams

The Ultimate Drink Holder! ABC – ANY BOTTLE CAGE! Fits almost any bottle, cup, or container 2 1/4" to 4 3/4". Turn knob to tighten and turn to loosen. Crank it down so drink won't come out or set to desired interference fit for easy in or easy out. - Handlebar, frame, and seat post adapters available.

BiKASE's Beetle Top Tube/Stem Phone Bag is perfect for your phone, wallet, keys, gels and other smaller items. This fine 600-denier nylon bag quickly and easily attaches to your bicycle frame top tube or your stem with its Velcro and shock cord mount. Your phone goes on top and there's a zip compartment below for your other goodies. You can operate your phone through the clear window. The Beetle accepts iPhones and Samsung Galaxy S3 and S4s and has a removable spacer to fit big or smaller phones.

Fits any bottle and keeps them cool! Universal and insulated bottle holder that can mount on handlebars or frame! - Fits any bottle/can up to 3" diameter - Works on handlebars, frames, strollers, ATV's, poles, chairs, backpacks, and other?? - Includes 3 hook-and-loop straps with a rubber coating to prevent slipping. - Dimensions: 6" x 4.5"

The Charger Handlebar Bag provides a simple way to carry the necessary items with you while on your bicycle. Originally designed to carry a charger for an E-bike, the Charger Handlebar Bag can also carry so much more! Using 2 Velcro straps that securely attach around the handlebars and one strap around the stem, the Charger bag mounts securely without any tools needed! - 9? x 6? x 3.5? - dual zipper - top clutch handle for carrying - perfect for E-bike chargers while on the go - fits your daily essentials including a wallet, phone, sunglasses, e-reader, lip balm, keys and much more.

Are you looking for an incredibly simple way to mount your phone to your bicycle? Do you want that case to have a plethora of mounting options and accessories? Well... look no further than the ElastoKASE from BiKASE. Utilizing the 1/8 turn connection of the GoKASE and the simplicity of a rubber lined, gripping shock cord, the ElastoKASE is your "go to" phone or anything case. • Phone holder for 6-inch phones and smaller • Works with GoKASE attachments and brackets • Material: TPE & Shock Cord

The Little John Frame Bag is designed to fit on the top tube or under the top tube as a small storage bag while you ride. It provides plenty of room to carry a smartphone (any size phone with or without a case), energy bars, sunglasses, and keys. This bag allows you to bring along everything you need while riding. Product features: - frame bag mounts on top tube or under top tube - 3 multi-positional straps for mounting - fits the largest phones with large cases - made of 840 denier nylon & polyester - 9” x 1 3/4” x 4"

The BiKASE Momentum family of saddle bags is the perfect complement to any ride. With a narrow and contoured design, the Momentum fits snugly between the seat post and saddle without interfering with the rider, and, with a double strap design, it couldn't be easier to install. Round that out with a taillight mount and reflective striping. - Reflective stripes - Internal mesh pocket - Internal elastic band - Strap light holder - Small: 25 cubic inches - Medium: 50 cubic inches - Large: 75 cubic inches - X-Large: 110 cubic inches (Black only)

Compact holder for Tube and Tools. Separate compartments for tools, CO2 & tools so they won't fall out. Fits narrow and wide/big tubes.

The Happy Can from BiKASE is a convenient handlebar/stem mounted drink holder or general purpose stash sack. - easy to connect bracket to handlebar or stem - securely fits cycling water bottle or other bottle sizes - perfect to use as a small storage bag for snacks or phone - mesh side pocket - rain fly with draw string to secure water bottle on bumpy rides

A versatile bag designed to fit on handlebars or under the seat. - Reflective accents and webbing light holder. - Water-resistant zippers and oversized zipper pulls. - 4 3/4" x 8", 150 cubic inches

The Beetle 6 is a larger version of the BiKASE Beetle that has been stretched to accommodate the iPhone 6/6S Plus and other large mobile phones. Storage space underneath phone compartment for energy bar, wallet, keys, or tools. Mounts securely to the top tube using Velcro straps and shock cord around stem. - Pocket fits iPhone 6/6S Plus and other larger smart phones - Clear cover allows device visibility and operation - Mounts to top tube or stem - 2 multi positional straps & shock cord for mounting - Internal lastic stiffener and anti-slip fabric bottom - dual zippers - 8" x 4" x 2"

Bessie Rear Basket Strap Mount. Milk crate inspired basket that will fit any rack. - Rear basket easily attaches and detaches rear bicycle rack (not included) using 2 hefty rubber straps with hooks. - Removable Velcro carrying handles - Dimensions: 13 x 8 x 5 in - Size: 625ci - Max capacity 8lbs - Made with durable molded plastic - Color: Black

The BiKASE Long John takes top tube bags to the next level. Need more space than the Trifly but really don’t want a full-fledged frame bag? Then the Long John is the perfect option for you. With multiple mountain straps and positions, the Long John can be mounted like a traditional top tube bag, or… flip it over and use it like a frame bag. With side zippers, it doesn’t matter how you mount it… your gear always remains in reach! - Can be mounted above or below the top tube - Side zippers allow the rider to access their gear at any angle - Multi-position straps with elastic to mount firmly on top tube - Works with bikes with limited space between top and down tubes

The Beetle X Phone Bag is designed to place any phone on your Top Tube or Stem for easy access to your phone, energy bar, phone, wallet, or other small items. Any smartphone with or without a case will fit (iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone 10, etc.). - 4 multi-positional straps for mounting - Straps are extra-long, so cut to the desired length - Fits the largest phones with large cases - Phone is operable & audible while in the case - Good size for wallet, energy bar, and wallet - Made of 840 denier nylon & polyester - 7" x 3 1/2" x 2 1/2"

Everything you need for an all-day ride, close at hand. The Buddy Handlebar bag mounts to your handlebars with hook-and-loop attachment along with bars and frame. Features a large main compartment, separate dual-accessible phone compartment, lanyard, and easy-to-grab zipper pulls. Opens up completely for easy access. Loop MOLLE on the front to attach different items. Look around for some cool hook patches that can attach to the front of the bag. - 5 multi-positional straps for mounting - Straps are extra-long, cut to the desired length - Fits the largest phones with large cases - Phone is operable & audible while in the case - Made of 840 denier nylon & polyester - 11" x 5" x 4"

Great bag for the riding essentials and great off the bike! - Handlebar and frame bag and doubles as a fanny pack or sling pack. - Stow-away compartment for shoulder/waist strap. - Reflective accents with water-resistant materials. - Dimensions: 8" x 5" x 2"

The Pet Cover for the Bessie Front Basket is the perfect pet carrier for your bicycle. The cover easily attaches to the Bessie Front Basket using a drawstring. It also has a full zip opening so you can easily put in and take out your small pet. The top of the Pet Cover is made with a mesh material, therefore making it breathable which allows for constant air flow. Most importantly the Pet Cover comes with a bottom pad for your pet to have a comfy ride! - Size: 14" x 10" (fits most baskets of this size) - We designed this cover to be used with the Bessie Front Basket by BiKASE (p/n 1057) Here are the specifications of the pet cover: - The cover is 8" tall, making the full Bessie basket and cover about 13" tall - Made of Nylon and EVA - Reflective logo - Mesh cover for breathability - Includes bottom pad

Milk crate inspired basket that mounts to handlebars ranging from 22mm to 32mm. Quick release with push of a button and includes handles for easy carrying. Dimensions are 13” x 8” x 6.75” and 625 cubic inches of volume. Weight limit is 10 lbs.

BiKASE's Koolpak is two bags in one! This versatile and durable 1,000-denier nylon carryall quickly and securely attaches to your rack (racks sold separately) via 4 Velcro straps, and to your handlebars with straps that pull out of a side sleeve. Plus, it's insulated to keep your refreshments cool and it holds up to 250 cubic inches of gear. It also has multiple zip pockets for easy organizing and access, a carrying handle for taking it along and reflective accents for safety. • Size: 11 x 6 x 6-inches • Volume: 250 cubic inches • Weight: 500 g • 2 in 1 mounting • 2 side zipper pockets • Sealed liner internal compartment • handle • Reflective side stripes/rear reflective

The Reggie 2 Drybag Pannier is a great companion on any bicycle ride to haul just about anything you want! Fully waterproof, the Reggie 2 Bike Drybag is a roll-top closer to keep out all water and is made with durable and puncture-proof water repellent material. It also comes with a shoulder strap with different carrying positions as well as an inside pocket for easy access to small items. - Fits most rear racks with strong plastic clips and a bungee net for tension on the rack - Interior pocket for storage of small items - Made from heavy-duty PVC Tarpaulin - Shoulder strap with multiple carrying positions - Reflective accents - Dimensions: 13 x 6 x 11 inches - 15 lbs. capacity - 850 cubic inches

Grocery Pannier that clips onto a standard rack. Has rain fly to keep water out and contents in! Folds flat when not in use and has tricky handle system. Uses 2 structure braces on the inside of bag when in use to keep the pannier sturdy while riding. 2 D-rings on each side of the pannier to attach shoulder strap! - 13" long x 6.5" deep x 10" tall (with an additional 4 inches with the use of the rain fly)

The Big Momma Bike Bag is a durable trunk bag with plenty of space! This is a medium rear rack bag from BiKASE that's universal and durable. The Big Momma trunk bag has plenty of space for your belongings. This is a slightly smaller version of the Big Daddy. - Top mesh pocket - Side zipper pockets - Side and rear reflective accents - Handle for easy carry - Front and bottom straps to attach the rack Specs - 600 denier polyester - Dimensions: 12 x 7 x 7.5 in. - Volume: 550 cu.in.

Easy-to-mount rack bag that will keep your items dry, safe, and protected. - Universal rugged rack bag with 820 cubic inches of storage. Made with waterproof materials with a built-in rain/dirt cover, reflective accents to be seen at night, and plenty of pockets for organization. - 13" x 9" x 7"

The Big Daddy 2 bike rack bag by BiKASE comes with a large main compartment with a seam-sealed liner, making the internal bag waterproof and drop down panniers on each side, adding extra storage for when needed! The Big Daddy 2 bike rack bag fits on all standard size rear bicycle racks using 4 straps to keep the bag tight and secure! - RF seam sealed internal liner - waterproof zipper on main storage compartment - water bottle/drink holder that will fit multiple size bottles - bungee net on top for added storage - drop down expandable side panniers - shoulder strap included - reflective accents - designed to fit most racks - dimensions: 13" x 9" x 8" (with panniers) - 1400 cubic inches, includes panniers

Adjustable panniers to fit any bike rack! - Adjustable to different widths of racks - Dual panniers that simply throw over the top of your rack - RF Sealed construction with water-resistant zippers will keep your stuff dry! - Made of water-resistant PVC/TPU - Dimensions: 11.5" x 10.5" x 6" - 1500 cubic inches

The CoolKASE is a soft cooler that that is mountable to the front or rear rack of a bicycle, ATV’s, scooters, kayaks, and other forms of transportation. This portable cooler is a great way to store drinks and food for a picnic, a day of fun in the sun or when you go camping! You pick the adventure, the CoolKASE is always ready to GO! Product Features: - Mountable to any type of rack on a bicycle, ATV, scooter, moped, kayak, or any other form of transportation - Tiny but mighty! Holds up to twelve 16-ounce bottles and up to 5 pounds of ice (800 cubic inches) - Inside dimensions 8" x 11" x 9" - Waterproof liner - Puncture resistant outer shell (made with reinforced scrim material) - Multi-use straps and hooks - Easy to clean - Light to carry - Simple to store - Overall construction is RF welded to make it extra durable and watertight when upright - Includes a very useful bottle opener! - Reflective accents for safety when traveling at night