Skip to main content

Filter By:

Tools/Maintenance

You don't need a lot of tools—you just need the right tools. Our goal is to provide a unique selection of quality bicycle tools at affordable prices.

$649.99
The Pro Burrito Tool Kit features 41 handpicked professional tools and an extensive selection of 1/4" hex bits all enclosed in a versatile waterproof tool roll. This ultra-portable tool kit leverages the versatility of Pedro’s hand tools to provide an impressive coverage of adjustments, installations, and repairs making it perfect for the professional mechanic seeking a compact event tool kit. The Burrito Tool Roll II features a large 23x16in (60x40cm) surface with numerous pockets in assorted sizes and types including a large mesh zipper pocket to securely hold small parts or personal items. The Burrito II also features a unique x-frame system that converts the flexible roll into a rigid tool pallet. Unroll, install the frame poles, hang off a repair stand or tool case, and get to work. Designed for easy transport and efficient storage, the Pro Burrito Tool Kit is perfect for the car, taking to events, or a compact home shop setup. Tool List:- T-Handle Bit Drive w/ Bits- Fixed Torque Driver - 5Nm w/ Bits- L Hex Wrench Set - 9 piece- L Torx Set - 7 piece- Tire Lever Pair - Yellow- Shop Chain Tool- Quick Link Pliers- Pro Travel Pedal Wrench w/ 24mm Socket Drive- Pro Chain Whip w/ Integrated Fixed Gear Lockring Wrench- Pro Cassette Lockring Socket w/ Pin- Freewheel Socket for Multi-Speed 12-Spline x 23mm & Campy BB/Cassette- External Bottom Bracket Socket, 16x44- Crank Adjusting Cap Driver- Needle Nose Pliers- Diagonal Cutters- Cable Cutter- Pro Chain Keeper- Pro Bit Driver w/ JIS PH #1, JIS PH #2, 5mm Flat Blade bits- Pro Spoke Wrench - 3.23 & 3.45mm sizes- Tape Measure- Chain Checker Plus II - Chain wear check tool, chain hook tool, and chainring nut wrench- Crowfoot Flare Wrench - 7 & 8mm- Ratcheting Combo Wrenches - 9mm & 10mm sizes Disc Wrench - 7 & 8mm Flare Wrench & Rotor Truer- 1/4" Hex Bits (1" Length): JIS #1 PH, JIS #2 PH, 5mm FLAT BLADE, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm hex, T10, T15, T20, T25, T30 torx, & 1/4" hex to 1/4" square bit adapter- 1/4" Hex Bits (2" Length): 4mm & 5mm hex & T25 & T30 torx - Perfect for the professional mechanic seeking a compact event tool kit. - Includes an extensive selection of professional tools covering an impressive range of installation, adjustment, and repair tasks. - Versatile Burrito Tool Roll II keeps tools organized and protected.
$605.85
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. Includes: • 30.1 mm reamer (part #751.2) and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1 as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC30. Accessories will allow service in other standards.
$605.85
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard. Includes: • 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 Facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.
$673.99
The standard of the bike industry for over 40 years, the PRS-2.3 clamps two bikes and rotates horizontally 360 degrees, allowing one bike to be swung out of the way to work on another. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use. The PRS-2.3-1 features our 100-3C Adjustable Linkage Clamps, with a time-tested design and straightforward operation. - Maximum weight capacity: 120 lbs. (54 kg) - Clamp capacity: 0.875" to 1.625" (22–41 mm) diameter tubes - Clamp jaws are nominally 4" (100 mm) wide - Clamp height: adjustable from 50" to 62" (128–158 cm) - Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector - Can be installed onto the #135 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)
$668.99
- The PRS-2.3.1 is a professional quality double arm repair stand designed and built to withstand the rigors of everyday shop use. - Includes two 100-3D Micro Adjust Clamps (clamps tubes up to 3", fully adjustable clamping pressure, narrow 2.7" clamping jaws) - Clamps two bikes simultaneously - Clamps rotate 360 degrees horizontally and vertically - Heavy gauge, chrome plated steel tubing for rigidity and years of trouble free use - Clamping height easily adjusts from 50" to 62" (128cm to 158cm) using heavy duty lock block and locking pin system - Includes aluminum work tray - #135 Steel Base Plate sold separately - Use FP-2 Floor Mounting Plate to mount stand directly to floor (sold separately)
$669.95
- 150lb holding capacity - Includes work tray (#105) (900119-01) - Base not included (900706)
$634.95
Built to withstand the rigors of every day shop use, the PRS-3.3 is the stand of choice for professional mechanics around the world. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use. The PRS-3.3-2 features our 100-3D Micro-Adjust Clamp with narrow clamping jaws and a dual-stage, cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size. - Maximum weight capacity: 120 lbs. (54 kg) - Clamp capacity: 0.875" to 3" (22–76 mm) diameter tubes, including aero tubes - Clamp jaws are nominally 2.75" (70 mm) wide - Clamp height: adjustable from 50" to 62" (128–158 cm) - Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector - Can be installed onto the #130 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)
$579.95
Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accurately self-center nearly any diameter wheel 16-inch to 29+ and any tire width up to 5-inches+. - Both uprights move simultaneously to always keep wheel centered in the stand - Accommodates tire widths up to 5-inches+ with or without brake rotor mounted - Speed knob to quickly change axle widths - Accommodates hub widths from 75mm to over 250mm - Precise operation and adjustability - Built in thru-axle adaptors - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims
Page 1 of 1