Filter By:
- Headlights (4)
- Taillights (8)
- Parts & Accessories (34)
- Show More Brands
- Show Fewer Brands
Lighting
Be seen, be safe! Whether you're commuting to work or doing a 24hr race we have the lighting you need for early morning and late night riding.
$4.99
Product details
- Perfect for mounting compatible Flare taillights to rear rack
- Includes a bolt and star washer for extra security
- Easiest to install with light installed for better leverage
$2.99
Product details
- Replacement mounting strap for Bontrager Glo and Ember lights
- Silicone strap allows for quick installation and removal of light
- Fits 22.2 – 31.8mm handlebars, seatposts, and much more
$4.99 - $5.50
Put a Flare almost anywhere
- For use with all Flare tail lights
- Perfect for attaching to a seat pack, belt, backpack, or anything with a loop
- 2g
$5.99
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights
- Also able to charge most other Micro USB systems
- 9 inches/23cm long
$7.99
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.
$9.99
Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.
$6.99
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
$6.59
- Simplistic safety light designed to be seen
- Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars
- 3 modes including 1 steady and 2 flashing modes
- Powered by 2 CR2032 batteries
- Lumens: 6
$7.99
Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.
$7.99
• 2 bright Nichia LEDs
• Uses 2 CR 2032 lithium batteries (included)
• 100 hour run time
• 3 modes: 2 flashing and 1 steady
• Water-resistant silicone body
$9.79
- 32 lumen single LED safety light
- 2 modes - steady and flashing
- 2 CR2032 batteries included
- Water resistant design
$9.79
- 8 lumen, single LED safety light
- 2 modes - solid and flashing
- Up to 110 hour run time with 2 CR2032 batteries (included)
- Multi-fit rubber strap attachment
$8.99
Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.
$7.99
• 2 bright Red LEDs
• Includes 2 (CR 2032) lithium batteries
• 100 hour run time
• 3 mode (2 flashing modes & steady mode)
• Water resistant silicone body
$7.99
-Mounts easily to front racks with threaded M5 mounts
-Allows for unobstructed light positioning
-22.2mm clamping diameter
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light
- Designed specifically for aero seat posts
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal
$9.99
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
$6.99
- Mounts Beamer and Blaze 1/2W lights to a helmet
- Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB
- Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
$5.99
- Quick Strap mounts, adjusts or removes in seconds without tools
- Fits 25.4-35mm handlebars
- Compatible with Blazes, Beamers, 1200 and Super Spot
$5.99
- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights
- Fits 25.4 – 31.8mm handlebars
$5.99
- Fits 25.4-31.8mm handlebars
- Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
$4.99
- Attaches to rear racks
- Compatible with: Blinky 3,5,7 and Superflash
- 25mm between each of the top horizontal holes (center to center)
- Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
$6.99
- Compatible with seatpost diameter 20mm-36mm
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
$5.99
Compatible with Shiner and Shiner Back lights
- Rubber pad with loop straps to quickly mount and remove light for recharging
- 50mm bolt spacing to fit most rear racks
$4.99
- Fits seatpost (up to 31.8mm) or seatstay
- Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light
- Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars
$6.00
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post.
- Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot.
- UV proof rubber strap
- Compatible with every PDW tail light except Asteroid and Fenderbot
$5.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works.
- Compatible with all PDW rear lights except the Asteroid and Fenderbot
- Horizontal holes are 50mm apart to fit European rack standards
- Vertical holes are 18mm apart to fit most reflector mounts
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
$9.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm.
SYSTEM COMPATIBILITY
- Lumina Series
- MiNewt Cordless Series
- Mako Series
WARRANTY
- This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
Page 1 of 2
Next page