Accessories

With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest-efficiency, smoothest-running SuperPista to date. Efficient, accurate, durable are the trademarks of the SuperPista floor pump. - High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm, and adjustable pressure units (uses two CR2032 batteries) - Full-size Ash wood handle with a secure carrier strap - High-efficiency 28mm SILCA leather piston assembly - Brass air check-valve assembly - Alloy barrel with plated steel piston shaft - Long filler hose with integrated Schrader chuck - Hiro locking-lever Presta chuck with a magnetic dock - Rated to 220psi

While "good enough" gets the job done, there is beauty in going above and beyond. The SILCA SuperPista Ultimate is the pinnacle of what a floor pump can achieve. From the highly accurate analog gauge to the magnetic HIRO dock to the lathe-turned Purpleheart wood handle, this floor pump embodies the SILCA mantra of passion, precision, performance. - Full Stainless Steel, Aluminum, Wood and Brass Construction—NO PLASTICS - SILCA Lifetime PLUS Shield Warranty—the most comprehensive warranty in all of Cycling - Ergonomic Purpleheart wood and Investment Cast Stainless Steel Handle - Full IGUS Linear Bearings for Ultimate Smoothness - Thick Full Grain Leather Piston Gasket—More Efficient and Durable than Rubber! - 1% Gauge Accuracy allows for Ultimate Ride Tuning

Trainer Mission Control Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland. And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one. - Stay Charged: built-in power strip keeps training necessities nearby and powered up. - Pick Your Height: adjustable for wide range of bikes and training configurations. - Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride. - Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing. - Enhanced Experience: a great addition to indoor training. Specs - Base: 13-inches wide x 36-inches Depth - Desk Top: : 12-inches Width x 20-inches Depth - Adjustable Desk Height from Floor: 40- to 55-inches - Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware - Cord Length: 6- foot AC cord - Built-in power strip with 2 AC and 2 USB outlets - Built-in cord retention clips for easy cable management and a clean look.

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Side-Load Dry Bag, which maintains a fixed height for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Side-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Side-Load Dry Bag is fixed-height for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Top-Load Dry Bag, which maintains a fixed width for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Top-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Top-Load Dry Bag is fixed-width for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with the widest gravel tires

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - BB not included

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with up to 700x45c or 27.5x2.1" tire widths (43/30T chainrings only) - BB not included

Power measurement is a crucial part of training, so we’ve made it as easy as possible to upgrade your Force AXS ride with Quarq technology. DUB-PWR takes the legendary reliability and accuracy of Quarq technology and inserts it into the crank spindle for clean integration that fits more bikes than ever. It’s invisible technology that adds minimal weight and will help you get to the finish line faster. FEATURES - DUB-PWR spindle-based unit measures left side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User replaceable AAA lithium battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset)

The X0 Eagle T-Type AXS™ Wide left crankarm with Power Meter spindle provides riders with accurate, live power data delivery housed in our most advanced aluminum crankset. The power meter technology is integrated through what SRAM calls “DUB-PWR” – a unique design that elegantly houses Quarq’s reliable and accurate power measurement inside the DUB crank spindle itself. Measuring left-side power to calculate total watts, it’s subtle, lightweight, compatible with any chainring setup, and boasts unbeatable battery life. It is also compatible with the Flight Attendant system, allowing for total connectivity between all AXS™ enabled components. No-compromise, no-fuss data delivery with robustness in mind. - Innovative "DUB-PWR" design allows for lightweight, subtle Quarq power integration - Compatible with RockShox Flight Attendant - Unique, groundbreaking design integrated with one of the lightest aluminum cranksets on the market - +/-3% accuracy means you'll always know your true watts output - Long battery life provides 400+ hours of usage - Waterproof (IPX7 waterproof to 1 meter for 30 minutes - Right arm, Bottom bracket, Chainring and Spider NOT included

Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The DFour DUB was designed specifically for Dura-Ace R9100 chainrings. Train using a Quarq power meter without changing your drivetrain. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DFour DUB power meter is made for. Train harder, ride faster, and unlock your ultimate potential. The DFour DUB power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. DFour DUB features Bluetooth low-energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. Features - Bluetooth low-energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad - no cadence magnet required - 10K Temperature Compensation - Battery - CR2032, 200-hour battery life, change without tools - OmniCal - swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy - within 1.5%, measuring both legs

Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The DFour DUB was designed specifically for Dura-Ace R9100 chainrings. Train using a Quarq power meter without changing your drivetrain. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DFour DUB power meter is made for. Train harder, ride faster, and unlock your ultimate potential. The DFour DUB power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. DFour DUB features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. Features - Bluetooth low-energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad - no cadence magnet required - 10K Temperature Compensation - Battery - CR2032, 200-hour battery life, change without tools - OmniCal - swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy - within 1.5%, measuring both legs

Your tires are the only thing connecting you to the road or trail, and having optimal tire pressure can have more impact on ride comfort than both frame and wheel choice combined. But finding the right tire pressure requires trial and error. TyreWiz for Moto is the first-of-its-kind tire pressure sensor for Zipp 3Zero Moto wheels and takes the guesswork out of finding that optimal tire pressure. Lightweight and durable, TyreWiz adds only 10 grams to your tires. With an IPX7 waterproof and dustproof rating, you can confidently ride on any type of trail and know that your tire pressure sensor will keep going strong. TyreWiz reports data with +/-2% accuracy at a resolution of .1 PSI; vastly more accurate than any tire pump on the market. TyreWiz monitors the air pressure in real-time and relays the data to a cycling computer or a smartphone. That information is relayed to the SRAM AXS app and delivers personalized recommendations and pressure alerts. TyreWiz gives riders access to highly accurate, real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort. Features - Data reported with +/- 2% accuracy at .1 PSI resolution. - Only compatible with Zipp 3ZERO Moto wheels. - Inexpensive, user-replaceable CR1632 battery lasts for 300 hours. - IPX7 dustproof/waterproof rating.

ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.

CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.

1/4" Ratcheting Reversible Click-Type Micrometer Torque Wrench with Bit Set and Custom Tool Roll Pedro's Demi Torque Wrench II is designed for left-hand or right-hand thread 3-15Nm torque settings required for critical components such as handlebars, stems, and controls. The new design features an integrated bit holder for storage of 8 bits on the wrench for convenience and versatility and the small overall size and low-profile head are perfect for tight spaces and easy handling. The Demi Torque Wrench II is quickly set using a micrometer-style dial and a simple locking mechanism. Accurate to within +/- 4 percent. Backed by Pedro's two-year warranty. - Integrated bit holder for storage of 8 bits on the wrench - Square 1/4" reversible ratcheting drive designed for left-hand or right-hand thread 3-15Nm torque settings - Small overall size and low-profile head perfect for tight spaces and easy handling. - Includes custom tool roll for wrench and bit storage. Included bits and adapters: - Hex: 2.5, 3, 4, 5, 6, (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 (50mm) - Crowfoot: 7 & 8mm Flare - WrenchDrive Adapter: 1/4" square to 1/4" hex

We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop-quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment. Kit Includes: - AWS-1 3-Way Hex Wrench - BBB-4 Big Blue Book of Bicycle Repair - CC-4 Chain Checker - CM-5.3 Cyclone Chain Scrubber - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CT-3.3 Chain Tool - DCW-1 Double-Ended Cone Wrench: 13/14mm - DCW-2 Double-Ended Cone Wrench: 15/16mm - DCW-3 Double-Ended Cone Wrench: 17/18mm - DH-1 Dummy Hub - DT-2 Rotor Truing Fork - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HXS-1.2 Professional L-Shaped Hex Wrench Set - MLP-1.2 Master Link Pliers - PAW-12 12" Adjustable Wrench - RR-12 Tape Measure - SD-2 #2 Phillips Screwdriver - SD-3 3mm Flat Blade Screwdriver - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench - VC-1 Valve Core Tool

Upgrades the DT-5 to the DT-5.2. - Four telescoping axle adaptors - Two stand off studs for Flat Mount alignment - 12mm front fork thru axle sleeve

- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-9C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing. - Fits PRS-6, PRS-7, and PRS-8 stands made before 6/96 - Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-3C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing. - Fits all generations of PRS-2, PRS-3, and PRS-4 stands, and PRS-5 stands manufactured before 6/96 - Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-5C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing, and feature replaceable jaw covers. - Fits PCS-4, PRS-5, PRS-6, and PRS-7 stands made after 6/96 - Fits bike frame tubes from 1" to 1 5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups, and adaptors. The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact. Also included are eight installation drifts for pressing bearings into pre-installed cups. - 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup ODs - 8 installation drifts for standalone bearing installation - Organized in a convenient storage case - Full list of compatible bearing inner/outer diameters found on instructions/parts diagram NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for use. The BBP-1.2 and BBP-AOS are also available as a complete set (part # BBP-2).

Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.

Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality solid cast-aluminum Adjustable-Linkage Clamp that boasts durable, protective and replaceable vinyl jaw covers. The clamp holds seatposts and frames from an inch to 1 5/8 inches in diameter and there are slots for cables, too. Plus, this stand rotates 360 degrees for optimum bike positioning.

The BX-2.2 features updated pallet configuration and storage options to help you keep your tools secure and easily accessible. The expanded custom designed tool pallets, including dual-sided pallet wings, are all housed in a virtually indestructible composite travel case. Designed and built for the traveling mechanic who demands the best! - Custom designed tool-holding pallets with loops and pockets - Folding, dual-sided pallet wings - Front tool pallet that stores securely inside during transport - Dent-proof composite shell built around an aluminum frame - Key lock - Nominal dimensions: 19" x 14.85" x 8.5" (48.25 cm x 37.7 cm x 21.6 cm), 13.2 lbs. (6 kg)

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor. NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.

The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case

The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Clamping height can be raised from 6.5" to 16.25" (92cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability

The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability

Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.

Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube. • PCS-4-1 uses the 100-5C Adjustable Linkage Clamp. • Clamp rotates 360º and is adjustable in height up to 67” (170cm) • Adjusts quickly from 55" to 72" • Approximate weight 26 lbs (11.8 kg) NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.

The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Adjustable Linkage model, which feature's replaceable rubber jaws; fits seatposts and frame tubes from 1 to 1 5/8-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a number on the clearance makes wheel truing easier and more accurate.

Park Tool's Event Stand is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races, or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. It includes two height-adjustable tripod uprights, two 47" (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length with the use of ES-2 Event Stand Add on Kits (sold separately). - The ES-1 adjusts from 94 to 120cm (37"-47") - Horizontal width (inside to inside): 2.23 meters (87")

Park Tool's Event Stand Add On Kit extends the length of the ES-1 Event Stand (sold separately) by eight feet. It includes one height-adjustable tripod upright, two 47” (119cm) support tubes, and one connector sleeve.

- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop. NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.? - Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Durable textured powder coat finish - Maximum weight capacity: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 44"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg) - #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"

The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike. Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport. The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit. - Maximum weight capacity*: 36 kg (80 lbs.) - Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide - Jaw width: 70 mm (2.75") - Height adjustable from 97 to 147 cm (38" to 58") - Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6") - Weight: 5.7 kg (12.6 lbs.) - The PRS-26 uses the 100-25D Micro-Adjust Clamp - Replaceable jaw covers (part #1960) *NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.

Perfect for taking to races and rides, the Portable Workbench is a bench that folds for easy transport and storage. It features a large work surface with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc. The folding steel legs provide a solid base for a toolbox and supplies, too.

The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell.

After years of research and testing, Park Tool's built what they consider the best shop clamp made. It’s smooth, versatile and built to stand up to everyday shop use. • #100-3D fits the following repair stands: PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-4, PRS-4 OS, PRS-4 OS-1, PRS-4OS-2, PRS-4W and PRS-33 • #100-5D fits PCS-4, PRS-7, some models of PRS-5 (with composite top tubes), and PCS-1 models manufacturer post 2002. (Note: Inspect top tube below lever for an embossed "939") • #100-25D fits PRS-25, PCS-10, PCS-11, PCS-12 (and PRS-15 with 1951-15 Adaptor Stud) • Grips nearly any tube from 7/8” to 3” (23–76mm), including aero tubes • Micro-adjustability allows perfect clamping pressure every time and prevents damage to thin-walled tubes • Long travel cam handle allows quick entry, adjustment and exit • Versatile: It grips nearly any tube including aero shaped tubing and seat posts 7/8” to 3” (23mm-76mm). Its narrow clamping jaws (2.7”/7cm) are designed to clamp securely yet fit into tight areas or on short seat posts. • Durable, replaceable jaw covers • Soft Touch saddle cradle provides a perfect spot to temporarily rest a bike by its saddle • Built to last: Powder coated, precision machined, die-cast aluminum main body parts and high quality small parts • Fast operation: Cam-actuated adjustment system for quick entry, adjustment and exit, plus handy “spinner” handle helps speed large size range adjustments

Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims, and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder-coated heavy-gauge steel and is manufactured, assembled, and calibrated in St. Paul, Minnesota. Strong, comfortable knobs and spring-loaded calipers and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use. Wheel Capacity: - Maximum wheel size: Up to 29" + with or without tire - Maximum hub width: 200 mm (7.87") - Maximum rim width: 102 mm (4") - Hub compatibility: Accommodates quick release and solid axle hubs, also accommodates thru axle hubs using included TS-2TA.2 Thru Axle Adaptors Mounting Options: - Bolt to benchtop — mounting holes are 9.5 mm (3/8") in diameter and 200 mm (7.9") from center to center - Clamp in vise — base is 76 mm (3") deep - Install in TSB-2.2 Truing Stand Base

Park Tool's 752 Reamer and Spacer Set allows reaming of bottom bracket frame shells in the BB30 standard. The reamer is sized at 41.94mm. It is used with the HTR-1 Head Tube Reamer and Facer and a 750.2 Centering Cone (each sold separately). The set includes a spacer to stop the reaming depth.

Park Tool's Repair Stand Base is a steel base plate for the PRS-2 OSLB, PRS-2 OS-1, PRS-2 OS-2 Repair Stands (each sold separately). - 23" x 35" x 7/16" steel plate - Approximately 118 lbs - Black painted

Park Tool's 130 Repair Stand Base is designed for the PRS-3, PRS-3OSLB, PRS-3 OS-1, PRS-3 OS-2 and the PRS-23 LB Repair Stands (each sold separately). • 22-1/2" x 22-1/2" x 7/16" (57cm x 57cm by 1.1cm) steel plate • Approximately 68 lbs (31k) • Black painted

The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.

The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components. Utilizing expanding collets, an extendable shaft, and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact. The SHX-1 is compatible with cartridge bearings with inner diameters from 6 to 32 millimeters, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets. - Set of 5 expanding collets covers most bicycle bearing IDs from 6mm to 32mm - Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed - Organized in a convenient storage case

Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.

Updated with a smoother, more solid rotation system! Originally designed for professional Pro Tour mechanics. The PRS-22.2 firmly holds any bike without clamping the frame or seat post by supporting the bottom bracket then locking either the front or rear dropouts. Works with any style axle system, including quick release and all sizes of thru-axles without cumbersome adaptors. Ideal for cleaning and general repair work, the PRS-22.2 features a solid tripod base and folds compactly for storage or transport. - Precisely constructed of anodized 6063 T6 lightweight aluminum and durable composites (12.5lbs, 5.67kg) - Adjustable BB height of 30" to 45" / 76cm to 114cm - 360 degree horizontal rotation allows easy access to all sides of the bike - Customizable bottom bracket supports accommodate a wide variety of BB shells - Main beam is adjustable fore and aft to customize balance points - Adjustable collar features receivers for optional accessories (sold separately) 106 Work Tray and PHT-1 Paper Towel Holder - Easily transported in the BAG-20 (sold separately)

Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool's Frame and Fork Taps cut easily and fit conventional tap handles. - Tap-12.1: 12Mm X 1.0 - Tap-12.2: 12Mm X 1.5 - Tap-12.3: 12Mm X 1.75 - Tap-15.1: 15Mm X 1.0 - Tap-15.2: 15Mm X 1.5 - Tap-20.1: 20Mm X 1.0 - Tap-20.2: 20Mm X 1.5 - Tap-20.3: 20Mm X 2.0

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

In keeping with its commitment to innovation, Ortlieb has just introduced another PVC-free line of products made of a polyurethane-coated polyester fabric. The base fabric of the products in the Free Line is coated with polyurethane in a manner that ensures lasting waterproof qualities. The result is a waterproof and durable canvas material that is as outstanding as the conventional Ortlieb canvas material when it comes to durability and service life. The PVC-free version of the proven Ortlieb Back-Roller was developed for cyclists and outdoor enthusiasts who would like to avoid PVC entirely. This rear pannier bag with a roll closure offers ultimate practicality for all of your bike tours and weekly grocery-shopping ventures, especially on account of its generous payload. Thanks to its waterproof exterior, easy-to-clean interior and shoulder-bag function, the Back-Roller Free is ideal for all who would like to use their bikes despite having things to carry. With the Quick-Lock2.1 system, the bags attach to any bike rack with a tube diameter of up to 16 mm. Larger hooks (e.g. for e-bikes) are available separately. - Classical rear pannier (pair) with roll closure - Made of PVC-free, PU-laminated polyester fabric - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picnic) - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Easy to clean inside

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

The perfect pair of bags for any adventure: you'll be astonished at how much gear fits in the Ortlieb Bike-Packer Plus! The classic flap closure is easy to operate and provides a maximum of stowage on top. The waterproof, three dimensional front compartment offers additional space for many of the small items you may need to access quickly while en route. The durable, high-quality Cordura fabric provides optimal protection against water, dust and abrasion. Thanks to the proven QL2.1 system with self-closing hooks, attaching the Bike-Packer Plus to your bike rack and removing it again is a matter of seconds. All of these features allow you to devote your attention to your tour and the beautiful sights to see along the way, no matter what the weather! - Pannier pair with lid closure and large packing volume - PU-laminated Cordura - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside